V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
FLOOR TENONING PRODUCTION Z525-H525
Double rail feeding and 5 + 5 station are adopted. The feeding part adopts high precision chain rolling track system.
The track is made of high hardness and wear-resistant alloy material, with low pressure air blowing device in the
track to ensure that the track is durable and does not need maintenance. The feeding speed is regulated by
frequency conversion, and the cutter shaft is driven by high-speed frequency conversion motor. The structure is
compact, high-speed and high-precision. The pressing beam adopts electric lifting and broadband adjusting, which
has the function of digital display of width. Each working station is equipped with upper pressing plate and lower
supporting plate to ensure high processing accuracy.
Frequency control of motor speed,high precision conveyor chain rolling guide feed system.Adopted widen gy high
precision linear orbit,machine can run in precision and wearable.It assure the precision when widen the working
size,also can guarantee to fit your highly requirement for setting the working width.
| Specification and model | VH-H525 | VH-Z525 |
| Maximum processing length | 2500 MM | |
| Minimum processing length | 600MM | |
| Max. Working width | 250MM | |
| Min . Working width | 90MM | |
| Minimum machined thickness | 8MM | 8MM |
| Maximum machined thickness | 25MM | 25MM |
| Feeding speed | 20-60 [m/min] | 20-60 [m/min] |
| Feed motor power | 4KW | 7.5KW |
| Feed motor power | 6000 [Rotation/min] | 6000 [Rotation/min] |
| Pre-cutting tool and forming tool motor power | 6.5 [kilowatt] | 6.5 [kilowatt] |
| The motor power of finishing cutter and button cutter is | 5.5 [kilowatt] | 6.5 [kilowatt] |
| Axis Size | Φ40MM | Φ40MM |
| Installable knife diameter phi | Φ220-280MM | Φ220-250MM |
| Operating voltage | 380+10%[Volt] | 380+10%[Volt] |
| Working frequency | 50 +10%[Hertz] | 50 +10%[Hertz] |
| Auxiliary Voltage | 220 [Volt] | 220 [Volt] |
| Air pressure | 0.6Mpa | 0.6Mpa |
| Total power | 92.6kw | 73.8kw |
| Physical dimension | 5100*4750*1850MM | 5680*2105*1930M |
Double rail feeding and 5 + 5 station are adopted. The feeding part adopts high precision chain rolling track system.
The track is made of high hardness and wear-resistant alloy material, with low pressure air blowing device in the
track to ensure that the track is durable and does not need maintenance. The feeding speed is regulated by
frequency conversion, and the cutter shaft is driven by high-speed frequency conversion motor. The structure is
compact, high-speed and high-precision. The pressing beam adopts electric lifting and broadband adjusting, which
has the function of digital display of width. Each working station is equipped with upper pressing plate and lower
supporting plate to ensure high processing accuracy.