V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
Woodworking Wood Moulding Machine Main Spindle Φ 40 Mm Working Width 230 Mm
Heavier Type Four Side Moulder with 230mm working width
Four Side Moulder VH-M623U
| Professional solution for processing Hard wood strip, floor, doors and large cutting capacity strips. There are some example below. |
| | |
| Solid wood door frame sample | Solid wood floor sample | Kitchen cabinet door frame sample |
Feature
| 1. Body structure of the machine is made of casting Iron, it has better wear resistance and shock absorption. This provides a good basis for the smooth operation of the cutter shaft and feeding system; |
| 2. This Machine have Inverter feeding , feeding speed can up to 36 m/min; |
| 3. Each spindle have its own Motor , which can guarantee the power for cutting; |
| 4. All shaft adjustment are carried out in front of the machine for convenience; |
| 5. Electroplating with chrome improves durability of the worktable surface; |
| 6. The under drive roller improves feeding performance; |
| 7. Adopting electric component from well-known brand with steady quality; |
| 8. Sealed safety enclosure avoid splashing of wood chips and insulate the noises, it is good for the safe protection; |
| 9. Short material auxiliary device is equipped for advancing the smooth feeding of short piece availably; |
| 10. Optionally Choice: Slotted plane for special need of the customers, restructuring to high speed moulder with speed up to 60m/min. |
| Model | VH-M623U | |
| Specification | Working width | 25-230 |
| Working thickness | 8-160 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power (KW) | 1st Lower Shaft | 7.5kw/10HP |
| Right vertical spindle | 7.5kw/10HP | |
| Left vertical spindle | 7.5kw/10HP | |
| 1st Upper Shaft | 11kw/15HP | |
| 2st Lower Shaft | 7.5KW/10HP | |
| Universal spindle | 5.5kw/10HP | |
| Feeding beam lifting | 0.55kw/0.75HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Total power | 52.55kw/71.39HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 180 | |
| Left vertical spindle | Φ 125-Φ 180 | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| Universal spindle | Φ 125-Φ 180 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |
The unique feature of the U series is that it is equipped with an univeraal cutter shaft in the rear.its
position can be adjusted to process special shapes that the vertical and horizontal cutter spindles
can't do.
Professional solutin:four-side planing,fit for making wooden lines,wooden mouldings and
processing special-shapes,etc.Can cut deeply.