V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
160 Mm Working Width Wood Moulding Machine
Medium Type 4 Side Moulder VH-M616
Support optional short wood roller to make sure the smooth convey,The front and back pressing plate can be
adjusted respectively. Even the wood thickness changes frequently,youu can stabilize it under worktable. Every
accessory quality is guaranteedwith Exquisite processing equipment and elaborate technology.
There are some example of moulding below:
| | |
| Solid wood picture frame | Solid wood line |
VH-M616 Product Details
| 1. The lathe bed is of integral structure , being made of casting with damping performance and the rigidity of the
lathe bed is better. Laying a good foundation for the smooth running of the cutter shaft and feeding system. |
|
2. Inverter feeding speed range from 6 – 36m/min |
|
3. Each shaft have individual Motor , which can ensure maximum cutting power |
|
4. The adjustment of spindle is in front of the machine for convenience |
|
5. Hard chromed worktable good provide wear resistance |
|
6. The under drive roller is equipped for advancing feeding performance. |
|
7. Manual lubrication to the work table and carriage , easy to centralized control |
|
8. Configure well-known brand electrical components, strong stability |
|
9. Pneumatic pressure loading to top feed rollers separately adjustable, for easy of feeding stock with variation
in thickness; |
|
10. Equipped the short material auxiliary device for improving the smoothness of feeding short piece material. |
|
11. Other alternative configurations: The normal plane can change to slotted plane for special requirement of the
customers; Increaseing the power of motor; Changing voltage of the machine |
| Model | VH-M616 | |
| Specification | Working width | 25-160 |
| Working thickness | 8-120 | |
| Working table length | 1500 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution(r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power(KW) | 1st LowerShaft | 4kw/5.5HP |
| Right vertical spindle | 4kw/5.5HP | |
| Left vertical spindle | 4kw/5.5HP | |
| 1st UpperShaft | 5.5kw/7.5HP | |
| 2nd UpperShaft | 4kw/5.5HP | |
| 2nd Lower Shaft | 4kw/5.5HP | |
| Feeding beam lifting | 0.55kw/0.75HP | |
| Feeding motor | 3kw/4HP | |
| Total power | 29.05kw/39.5HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 160 | |
| Left vertical spindle | Φ 125-Φ 160 | |
| 1st Upper Shaft | Φ 125-Φ 160 | |
| 2nd Upper Shaft | Φ 125-Φ 160 | |
| 2nd Lower Shaft | Φ 125-Φ 180 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter(mm) | Φ140 |
Note: Any variation to the specification above mentioned will not be further notified since the product specification
and designs keeps on changing.