V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
| | This is the CNC mobile device for left vertical shaft. |
| | Interface+plc system, with accurately control to top
spindle(Height) and left spindle(width) |
| | Electronic lifted and lowered for upper cutter shaft
(standard configuration) |
| | Configured central lubricating system whhich is more
convenient for maintenance. |
| This 4 side moulder VH-M623V has inverter feed speed of 6-36 m/min and can process timber with working
width of 25-230 mm and working thickness of 8-160 mm. The six cutter shafts of the moulder with greater motor
power are able to processing hard wood strip, floor, doors and some strips need large cutting capacity . By
changing tools different shape of wood strips can be obtained. There are some example belows: | |||
| | | | |
| Solid wood door frame | Solid wood floor | Solid wood kitchen cabinet | |
| Model | VH-M623V | |
| Specification | Working width | 25-230 |
| Working thickness | 8-160 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power | 1st Lower Shaft | 7.5kw/10HP |
| 1st Right vertical spindle | 7.5kw/10HP | |
| 1st Left vertical spindle | 7.5kw/10HP | |
| 2st Right vertical spindle | / | |
| 2st Left vertical spindle | / | |
| 1st Upper Shaft | 11kw/15HP | |
| 2nd Upper Shaft | 7.5kw/10HP | |
| 2nd Lower Shaft | 7.5kw/10HP | |
| Feeding beam lifting | 0.75kw/1HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Total power | 55.3kw/75.2HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| 1st Right Vertical spindle | Φ 125-Φ 180 | |
| 1st Left vertical spindle | Φ 125-Φ 180 | |
| 2nd Right Vertical spindle | / | |
| 2nd Left vertical spindle | / | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| 2nd Upper Shaft | Φ 125-Φ 180 | |
| 2nd Lower Shaft | Φ 125-Φ 200 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |