V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
M621HS is more than one machine,it combines 4-Side Moulder and Multiple Rip Saw.It can reduce processing time or wood
Slice Cutting 4-Side Moulder VH-M621HS
|
Four Side Moulder with cutter saw
The VH-M621HS Moulder with cutter Saw is a combination of four side moulder and multiple rip saw
in one, to achieve multiple functions. Therefor using this machine can help factory reduce processing
time of wood and greatly enhance production capacity without more labour cost.
VH-M621HS is a special type of machine for wood planning and sawing, it can be used to produce
high-volume sauna board, wall panels, preservative-treated timber, wood blinds and other solid wood
material. |
VH-M621HS Outstanding character
| These two saw arbor can fit with multiple
saw, so multiple can one-time saw a piece
of wood. |
| Equipped with 4 groups of vertical feeding
wheels for active discharging, which
makes the feeding of finished products
more smooth after cutting. |
| Individual motor to each spindles to
ensure maximum power for cutting. |
| There are 3 knobs on the left, which is
used for ensuring smooth feeding of wood
materials with different thicknesses in
stages. |
| Model | VH-M621HS | |
| Specification | Working width | 25-210 |
| Working thickness | 8-140 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution(r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power(KW) | 1st LowerShaft | 5.5kw/7.5HP |
| Right vertical spindle | 5.5kw/7.5HP | |
| Left vertical spindle | 7.5kw/10HP | |
| 1st UpperShaft | 7.5kw/10HP | |
| Right Saw Shaft | 18.5kw/25HP | |
| Left Saw Shaft | 18.5kw/25HP | |
| Feeding beam lifting | 0.55kw/0.75HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Left discharging motor | 0.75kw/1HP | |
| Right discharging motor | 0.75kw/1HP | |
| Total power | 70.5kw/94HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 180 | |
| Left vertical spindle | Φ 125-Φ 180 | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| Right saw arbor | Φ 180-Φ 300 | |
| Left saw arbor | Φ 180-Φ 300 | |
| Saw shaft speed | 4500 | |
| Saw shaft diameter | Φ50 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 | |
| Overall dimensions (mm) | L4800*W1900*H1940 | |
| Suttle (kg) | 4300 |