V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
Practical Woodworking machine Five Head Four Side Moulder for wooden stair rail
| Four Side Planer VH-M516 and VH-M518 both have 5 heads with same motor power, there are one left
spindle, one right spindle, one upper spindle and two spindles on the bottom. Each spindles have its own
Motor, which can guarantee the power for cutting. Our planer use Inverter to feed, speed range is 6-
36m/min.
Both Planers have High rigid body structure, as it was made from cast iron. The damping performance and
the rigidity of the machine body would be better compared with steel. So laying a good foundation for the
smooth running of the cutter shaft and feeding system.
Adopting hard chromed worktable to minimize abrasion, and enhance operational life span. Planers are
configured the short material auxiliary device in the front, can effectively improve the smooth feeding of short
material.
The only difference between VH-M516 and VH-M518 are their processing width, for VH-M516 can only
process materials no wider than 160mm, VH-M518 can process bigger materials with 180mm width. It
depends on what kinds of wood materials customer use. |
 | |
| VH-M516 and VH-M518 can be used for
processing Soft wood strip, Medium cutting
capacity strip, MDF strip, HDF strip, Glued
laminated timber and Square boards. For
wooden furniture and wood profile processing. |
| Model | VH-M518 | VH-M516 | |
| Specification | Working width | 25-180 | 25-160 |
| Working thickness | 8-130 | 8-120 | |
| Working table length | 1500 | 1500 | |
| Feeding speed | 6-36 | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | 6500 | |
| Air pressure (Mpa) | 0.6 | 0.6 | |
| Motor power (KW) | 1st Lower Shaft | 4kw/5.5HP | 4kw/5.5HP |
| Right vertical spindle | 4kw/5.5HP | 4kw/5.5HP | |
| Left vertical spindle | 4kw/5.5HP | 4kw/5.5HP | |
| 1st Upper Shaft | 5.5kw/7.5HP | 5.5kw/7.5HP | |
| 2nd Upper Shaft | / | / | |
| 2nd Lower Shaft | 4kw/5.5HP | 4kw/5.5HP | |
| Feeding beam lifting | 0.55kw/0.75HP | 0.55kw/0.75HP | |
| Feeding motor | 3kw/4HP | 3kw/4HP | |
| Total power | 25.05kw/34HP | 25.05kw/34HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | |
| Left vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | |
| 1st Upper Shaft | Φ 125-Φ 160 | Φ 125-Φ 160 | |
| 2nd Lower Shaft | Φ 125-Φ 180 | Φ 125-Φ 180 | |
| Remark | Feeding wheel diameter (mm) | Φ140 | Φ140 |
| Dust outlet diameter (mm) | Φ140 | Φ140 |
The Use and Characteristics of Machine Tools
This machine tool is our company's market research, according to the opinions of the vast number of users,
drawing on the advantages of similar products at home and abroad, by our company's own development of a new
generation of four-sided woodworking planer. The machine tool has compact structure and convenient adjustment
and operation. It is mainly used for processing wood products, such as wood square, wood board, decorative wood
lines, wood flooring and so on. It is the key equipment of construction forestry, furniture manufacturing and other
enterprises.
This machine can not be used to process light metals (copper, aluminium) and wood-based composites (wood-cement).