V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
4 Shaft Wood Moulding Machine , Four Cutter Planer Flooring Moulder Energy Saving
Four Side Moulder Medium Type VH-M418
| VH-M418 has four spindles and can process material with max working width of 180 mm and working thickness of 120mm. The lathe bed of VH-M418 is made of casting iron with damping performance, so rigidity of the lathe bed is better than steel. Laying a good foundation for the smooth running of the cutter shafts and feeding system. VH-M418 can be used to process Soft wood strip, Medium cutting capacity strip, MDF strip, HDF strip, Glued laminated timber and Square boards. It is a good choose for some simple furnitures production such as Children's furniture and Nordic Style Furniture ect, which does not need complex wood moulding. |
| 1. Inverter to feed, speed 6 – 36m/min; 2. VH-M418 spindles have individual Motor , which can guarantee the power for cutting; 3. All cutter shafts adjustment are carried out in front of the machine for convenience. 4. The machine Feeding Frequency inverter uses digital display, very easy to operate. It saves energy and also can reduce wearing because of mechanical transmission; 5. Electroplating with chrome improves durability of the worktable surface; 6. Equipped for advancing the smooth feeding of short piece availably; 7. Active feeding wheel is in front of the machine worktable, which make feeding easier and smooth; 8. Manual lubrication to the worktable and carriage, easy to centralized control; 9. Configure well-known brand electrical components, strong stability. 10. Sealed safety enclose to reduce noise levels, improve extraction and operator safety; 11. Optional: Moulder can be fitted with slotted plane for special requirement of customers. |
| Model | VH-M418 | |
| Specification | Working width | 25-180 |
| Working thickness | 8-130 | |
| Working table length | 1500 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution(r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power(KW) | 1st LowerShaft | 4kw/5.5HP |
| Right vertical spindle | 4kw/5.5HP | |
| Left vertical spindle | 4kw/5.5HP | |
| 1st UpperShaft | 5.5kw/7.5HP | |
| Feeding beam lifting | 0.55kw/0.75HP | |
| Feeding motor | 3kw/4HP | |
| Total power | 21.05kw/28.6HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 160 | |
| Left vertical spindle | Φ 125-Φ 160 | |
| 1st Upper Shaft | Φ 125-Φ 160 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter(mm) | Φ140 |
