V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
Heavier Type Four Side Moulder with 230mm working width
Four Side Moulder VH-M623E
Professional solution for processing Hard wood strip, floor,
doors and large cutting capacity strips.
| Quick liftable short material device |
| Every spindle is tested and assembled under air-conditional |
| There is feeder switch and emergency stop button at |
| Digital display shows the feeding speed of moulder.By adopting |
Quality system : High rigid body structure
The lathe bed is of integral structure,being made of casting with damping perfor mance ,and the rigidity of the lathe bed is better. Laying a good foundution for the smooth running of the cutter shaft and feeding system.
| Model | VH-M623E | |
| Specification | Working width | 25-230 |
| Working thickness | 8-100 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power (KW) | 1st Lower Shaft | 7.5kw/10HP |
| Right vertical spindle | 7.5kw/10HP | |
| Left vertical spindle | 7.5kw/10HP | |
| 1st Upper Shaft | 11kw/15HP | |
| 2nd Upper Shaft | 7.5kw/10HP | |
| 2nd Lower Shaft | 7.5kw/10HP | |
| Top spindle lifting | 0.37kw/0.5HP | |
| Feeding beam lifting | 0.75kw/1HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Total power | 55.12kw/75HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 180 | |
| Left vertical spindle | Φ 125-Φ 180 | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| 2nd Upper Shaft | Φ 125-Φ 180 | |
| 2nd Lower Shaft | Φ 125-Φ 200 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |
Glory comes from technology affirmation.
The rich have consistently buried science and technology research and innovation.
We have always been in the forefront of the industry with excellent Seiko products and
considerate service, the domestic market share as high as 30%.