V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
Automatic picture ,easy to operate one-button solution
Intelligent automatic self-detection system helps to monitor the operation of equipent at any time.
The hardness of main shaft is guaranteed with locked hydraumatic in the front horizontal
shaft and back up lathe bed.
Exquisite production technology with orderly inside.
Man-machine controlled interface: All parameters can be set through interface.The interface supports the setting
and displaying of Product information, tool date,width and thickness as well as the writing of Feeding speed and
interval time of each spindle
| | This is the CNC mobile device for left vertical shaft. |
| | Interface+plc system, with accurately control to top
spindle(Height) and left spindle(width) |
| | Electronic lifted and lowered for upper cutter shaft
(standard configuration) |
| | Configured central lubricating system whhich is
more convenient for maintenance. |
| This 4 side moulder VH-M623V has inverter feed speed of 6-36 m/min and can process timber with working
width of 25-230 mm and working thickness of 8-160 mm. The six cutter shafts of the moulder with greater motor
power are able to processing hard wood strip, floor, doors and some strips need large cutting capacity . By
changing tools different shape of wood strips can be obtained. There are some example belows: | |||
| | | | |
| Solid wood door frame | Solid wood floor | Solid wood kitchen cabinet | |
| Model | VH-M623V | |
| Specification | Working width | 25-230 |
| Working thickness | 8-160 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power | 1st Lower Shaft | 7.5kw/10HP |
| 1st Right vertical spindle | 7.5kw/10HP | |
| 1st Left vertical spindle | 7.5kw/10HP | |
| 2st Right vertical spindle | / | |
| 2st Left vertical spindle | / | |
| 1st Upper Shaft | 11kw/15HP | |
| 2nd Upper Shaft | 7.5kw/10HP | |
| 2nd Lower Shaft | 7.5kw/10HP | |
| Feeding beam lifting | 0.75kw/1HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Total power | 55.3kw/75.2HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| 1st Right Vertical spindle | Φ 125-Φ 180 | |
| 1st Left vertical spindle | Φ 125-Φ 180 | |
| 2nd Right Vertical spindle | / | |
| 2nd Left vertical spindle | / | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| 2nd Upper Shaft | Φ 125-Φ 180 | |
| 2nd Lower Shaft | Φ 125-Φ 200 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |