V-Hold Woodworking Machinery Co., Ltd.
V-Hold Woodworking Machinery Co., Ltd.
Add to Cart
Heavier Type Four Side Moulder with 210mm working width
Four Side Moulder VH-M721L
| Professional solution for processing Hard wood strip, floor, doors and large cutting capacity strips. There are some example below.Seek for change,we become more changeable. |
| | |
| Every accessory quality is guaranteed with the high quality machining equipment with our elaborate manufacturing. | Each cutter shaft is assembled and tested under air-conditioned environment and is supported by SKF bearing.The stable-worked shaft guarantees the surface roughness of finished products. | sood wood doorframe Wood sample |
Feature
| 1. Body structure of the machine is made of casting Iron, it has better wear resistance and shock absorption. This provides a good basis for the smooth operation of the cutter shaft and feeding system; |
| 2. This Machine have Inverter feeding , feeding speed can up to 36 m/min; |
| 3. Each spindle have its own Motor , which can guarantee the power for cutting; |
| 4. All shaft adjustment are carried out in front of the machine for convenience; |
| 5. Electroplating with chrome improves durability of the worktable surface; |
| 6. The under drive roller improves feeding performance; |
| 7. Adopting electric component from well-known brand with steady quality; |
| 8. Sealed safety enclosure avoid splashing of wood chips and insulate the noises, it is good for the safe protection; |
| 9. Short material auxiliary device is equipped for advancing the smooth feeding of short piece availably; |
| 10. Optionally Choice: Slotted plane for special need of the customers, restructuring to high speed moulder with speed up to 60m/min. |
| Model | VH-M721L | |
| Specification | Working width | 25-210 |
| Working thickness | 8-140 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power (KW) | 1st Lower Shaft | 5.5kw/7.5HP |
| Right vertical spindle | 5.5kw/7.5HP | |
| Left vertical spindle | 5.5kw/7.5HP | |
| 2Left vertical spindle | 5.5kw/7.5HP | |
| 1st Upper Shaft | 5.5kw/7.5HP | |
| 2st Upper Shaft | 7.5kw/11HP | |
| 2st Lower Shaft | 5.5kw/7.5HP | |
| Feeding beam lifting | 0.75kw/0.75HP | |
| Feeding motor | 5.5kw/7.5HP | |
| Total power | 46.75kw/63.5HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| Right Vertical spindle | Φ 125-Φ 180 | |
| Left vertical spindle | Φ 125-Φ 180 | |
| 2Left vertical spindle | Φ 125-Φ 180 | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| 2st Upper Shaft | Φ125-Φ 180 | |
| 2st Lower Shaft | Φ 125-Φ 180 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |
Several kinds of different spindle distribution, and supply optional configuration,meeting the different processing requirements.